I can’t see my speaker in the Wi-Fi list on my smartphone!

As a reminder:

• A single press of the ‘Pairing’ button activates your speaker’s Bluetooth discovery mode (for 10 minutes). It will then appear in the list of Bluetooth devices on your smartphone.
• Pressing and holding the button (for more than 5 seconds) will reset your speaker’s Wi-Fi settings. ‘Access point’ mode will be activated (for 10 minutes) so that you can reconfigure your player’s Wi-Fi settings via the Cabasse app.

The ‘Pairing’ indicator light is not flashing:

1. Press and hold the ‘Pairing’ button on your speaker (for more than 5 seconds).
2. Refresh the Wi-Fi list on your smartphone (or switch Wi-Fi off, wait a few seconds, then switch it back on)
   • The speaker should appear in the list of detected Wi-Fi networks (or saved networks if you have connected to it before).
3. Go back to the Cabasse app and follow the installation instructions

The ‘Pairing’ indicator light is flashing:

1. Turn off pairing mode by pressing the ‘Pairing’ button once (the indicator light will stop flashing).
2. Wait for about ten seconds, then restart the Wi-Fi pairing mode by holding down the ‘Pairing’ button for a few seconds (more than 5 seconds) (the ‘Pairing’ indicator light will flash).
3. Refresh the Wi-Fi list on your smartphone (or switch Wi-Fi off, wait a few seconds, then switch it back on)
   • The speaker should appear in the list of detected Wi-Fi networks (or saved networks if you have connected to it before).
4. Go back to the Cabasse app and follow the installation instructions.